background image

ASUS RS720-X7/RS8

5-37

5.5.1 

System Event Log

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

                  

Server Mgmt

  

Change this to enable or 

disable all features of 

system Event Logging during 

boot.

  Enabling/Disabling Options

  SEL Components 

 

   [Disabled]

  

 

 Erasing Settings

  Erase SEL 

[No]

  When SEL is Full 

[Do Nothing]

  Note:  All  values  changed  here  do  not  take  effect 

until computer is restarted.

→←:

 Select Screen

 

↑↓:

  Select Item

 

Enter: Select Item

 

+/-: Change Opt.

 

F1: General Help

 

F2: Previous Values

F5: Optimized Defaults

 

F10: Save & Exit

 

ESC: Exit

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

SEL Components [Disabled]

Allows you to enable or disable all features of system Event Logging during boot. 

Configuration options: [Disabled] [Enabled]

Erase SEL [No]

Allows you to choose options for erasing SEL. 

Configuration options: [No] [Yes, On next reset] [Yes, On every reset]

When SEL is Full [Do Nothing]

Allows you to choose options for reactions to a full SEL. 

Configuration options: [Do Nothing] [Erase Immediately]

•  The  following  items  appears  only  when  you  set 

SEL  Components

  to 

[Enabled].

•  All values changed here do not take effect until computer is restarted.

Summary of Contents for RS700-X7 RS8





























































































































































































Reviews: