Asus RS700-E7/RS8 User Manual Download

Page: 176 / 194

7-22

Chapter 7: Driver installation

7.5

Intel

C600 Series Chipset SAS RAID

(SATA mode) Drivers

This section provides the instructions on how to install the

Intel

C600 Series

Chipset SAS RAID (SATA mode) Drivers

on the system.

You need to manually install the Intel

C600 Series Chipset SAS RAID (SATA

mode) Drivers on a Windows operating system.
To install the drivers:
1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run the support DVD.

3. Click the item

Intel

C600 Series Chipset SAS RAID (SATA mode) Drivers

from the menu, and then follow the onscreen instructions to complete the

installation.

Summary of Contents for RS700-E7/RS8



































































































































































































Search results

Summary of Contents for RS700-E7/RS8

Reviews:

Related manuals for RS700-E7/RS8

Brands by name

Popular brands

Asus RS700-E7/RS8, User Manual

Search results

Summary of Contents for RS700-E7/RS8

Reviews:

Related manuals for RS700-E7/RS8

Brands by name

Popular brands