Chapter 2: Hardware setup
2-26
To reinstall the motherboard:
1. Firmly hold the motherboard by the
sides and insert it into the chassis
as shown.
2. Carefully adjust the motherboard
until the rear panel ports fit in place.
3. Use a Phillips (cross) screwdriver to
secure the motherboard with ten (10)
screws in the holes as shown in the
illustration in the previous section.
4. Reconnect all the required cables
to the motherboard. See section
2.6
Cable connections
for details.
5. Reinstall all the devices that you
have previously removed.
Summary of Contents for RS161-E5 - 0 MB RAM
Page 1: ...RS161 E5 PA2 1U Rackmount Server Service Guide ...
Page 10: ... ...
Page 108: ...Chapter 6 RAID Configuration 6 10 ...
