manualshive.com logo in svg

Asus RS161-E5 - 0 MB RAM, Service Manual, Page: 119 / 124

Share
Download
Asus RS161-E5 - 0 MB RAM Service Manual Download Page 119

ASUS RS161-E5/PA2

7-11

7.3 

nVIDIA

®

 driver installation

This section provides the instructions on how to install the nVIDIA

® 

Windows 

nFroce drivers, including NVIDIA SMBus Driver, NVIDIA Ethernet Driver, NVIDIA 

MediaShield, and NVIDIA Audio Driver.

7.3.1 

Windows 2000/Server 2003

To install the nVIDIA

® 

drivers on a Windows

®

 2000/ Server 2003 OS: 

1.  Restart the computer, and then log on with 

Administrator

 privileges.  

2.  Insert the motherboard/system support CD to the optical drive. The CD 

automatically displays the 

Drivers

 menu if Autorun is enabled in your 

computer. 

If Autorun is NOT enabled in your computer, browse the contents of the support 

CD to locate the file ASSETUP.EXE from the BIN folder. Double-click the 

ASSETUP.EXE to run the CD.

3.   Click the 

nVIDIA CK804 Professional

 option.

Summary of Contents for RS161-E5 - 0 MB RAM





























































































































Reviews:

No comments