Asus RS161-E5 - 0 MB RAM Service Manual Download

Page: 102 / 124

Chapter 6: RAID Configuration

6-4

6.2.2

Entering the NVIDIA

RAID Utility

To enter the NVIDIA

RAID Utility:

1. Restart the computer.

2. During POST, press <F10> to display the utility main menu.

The SATA ports are called channels that are associated with adapters. The first

digit in the Location field defines the adapter that the SATA port is associated with.

The 2nd digit defines the channel. The

field, That are used to specify Master or

Slave, is obsolete.
At the bottom section of the screen are the navigation keys. These keys allow you

to move through and select menu options.

[ESC] QUIT [F6] Back [F7] Finish [TAB] Navigate [

↑↓

] Select [ENTER] Popup

The navigation keys vary depending on the menu level or option.

[ESC] QUIT [F6] Back [F7] Finish [TAB] Navigate [

↑↓

] Select [ENTER] Popup

RAID Mode:

Striping

Striping Block:

Optimal

Free Disks

Array Disks

Loc Disk Model Name

1.0.M XXXXXXXXXXXXXXXXXX
1.1.M XXXXXXXXXXXXXXXXXX

[

→

] Add

2.0.M XXXXXXXXXXXXXXXXXX
2.1.M XXXXXXXXXXXXXXXXXX

[

←

] Del

NVIDIA RAID Utility Mar 23 2006

- Define a New Array -

Summary of Contents for RS161-E5 - 0 MB RAM





























































































































Search results

Summary of Contents for RS161-E5 - 0 MB RAM

Reviews:

Related manuals for RS161-E5 - 0 MB RAM

Brands by name

Popular brands

Asus RS161-E5 - 0 MB RAM, Service Manual

Search results

Summary of Contents for RS161-E5 - 0 MB RAM

Reviews:

Related manuals for RS161-E5 - 0 MB RAM

Brands by name

Popular brands