Asus RS160-E4 PA4 User Manual Download

Page: 177 / 186

ASUS RS160-E4/PA4

7.3.2.

Red.Hat/SuSE.Linux

Follow these instructions when installing the Intel

LAN controller base driver for

the in Red Hat

and SuSE Linux operating system.

Before.installing.the.LAN.driver:.

Before installing the LAN driver, you must install the kernel development

application. To install the kernel development:

1. Insert the Linux OS installation CD Disk 1 to the optical drive.
2. Double click “

Application”.>.“System.setting”.>.“Add./.Remove.

application

”.

3. Select “

Kernel.Development

” from the

Development.Tools

4. Follow the later steps and add different CDs according to the instructions

displayed.

Building the driver from the TAR file:

1. Insert the motherboard/system support CD to the optical drive and mount the

optional drive in the Linux platform.

2. Copy the base driver tar file from the motherboard/system support CD to the

directory of your local hard disk. The name format of driver file is “

e1000-

<Version>.tar.gz

”.

For example: the file name of driver version 7.0.38 is “

e1000-7.0.38.tar.gz

”.

• The Intel

LAN driver for Linux OS is located in:

\Drivers\INTEL.82563EB\PRO1000\LINUX

3. Untar or unzip the archive.

tar.zxf.e1000-x.x.x.tar.gz

4. Change to the driver src directory.

cd.e1000-x.x.x/src/

5. Use the command “makeinstall” to compile the driver module.

makeinstall..

6. After reboot the system, please refer to Linux distribution documentation to

configure the network protocol and IP address.

Summary of Contents for RS160-E4 PA4



























































































































































































Search results

Summary of Contents for RS160-E4 PA4

Reviews:

Related manuals for RS160-E4 PA4

Brands by name

Popular brands

Asus RS160-E4 PA4, User Manual

Search results

Summary of Contents for RS160-E4 PA4

Reviews:

Related manuals for RS160-E4 PA4

Brands by name

Popular brands