Asus RS120-E4/PA2 User Manual Download Page 54

Page: 54 / 166

Chapter 4: Motherboard information

4-8

8. Force BIOS recovery (3-pin RECOVERY1)

This jumper allows you to update or recover the BIOS settings when it gets

corrupted or destroyed.This jumper allows you to update/recover the BIOS

quickly.

To update the BIOS:

1. Prepare a CD-ROM that contains the original or latest BIOS for the

motherboard (P5M2R.ROM) and the AFUDOS.EXE utility.

2. Set the jumper to pins 2-3.
3. Restart the system, then insert the CD-ROM to the optical drive to

recover or update the BIOS.

4.  Shut down the system.
5.  Set the jumper back to pins 1-2.
6.  Turn on the system.

P5M2-R

P5M2-R BIOS recovery setting

RECOVER

(Default)

Normal

BIOS recovery

Summary of Contents for RS120-E4/PA2







































































































































































Search results

Summary of Contents for RS120-E4/PA2

Reviews:

Related manuals for RS120-E4/PA2

Brands by name

Popular brands

Asus RS120-E4/PA2, User Manual

Search results

Summary of Contents for RS120-E4/PA2

Reviews:

Related manuals for RS120-E4/PA2

Brands by name

Popular brands