Asus RS120-E4 - 0 MB RAM User Manual Download

Page: 170 / 174

A-2

Appendix: Reference information

A.1

Intel

EM64T

• The motherboard is fully compatible with Intel

Xeon 3000 series and Xeon

X3200 series processors running on 32-bit operating systems.

• The motherboard comes with a BIOS file that supports EM64T. You can

download the latest BIOS file from the ASUS website (www.asus.com/

support/download/) if you need to update the BIOS file. See Chapter 5 for

details.

• Visit www.intel.com for more information on the EM64T feature.
• Visit www.microsoft.com for more information on Windows

64-bit OS.

Using.the.Intel

.EM64T.feature

To use the Intel

EM64T feature:

1. Install an Intel

Xeon 3000 series and Xeon X3200 series CPU that supports

the Intel

EM64T.

2. Install a 64-bit operating system (Windows

XP Professional x64 Edition or

Windows

Server 2003 x64 Edition).

3. Install the 64-bit drivers for the motherboard components and devices from

the support CD.

4. Install the 64-bit drivers for expansion cards or add-on devices, if any.

Refer to the expansion card or add-on device(s) documentation, or visit the

related website, to verify if the card/device supports a 64-bit system.

A.2

Enhanced Intel SpeedStep

Technology (EIST)

• The motherboard comes with a BIOS file that supports EIST. You can

download the latest BIOS file from the ASUS website (www.asus.com/

support/download/) if you need to update the BIOS. See Chapter 5 for

details.

• Visit www.intel.com for more information on the EIST feature.

A.2.1.

System.requirements

Before using EIST, check your system if it meets the following requirements:

•

Intel

Xeon 3000 series and Xeon X3200 series processor with EIST support

•

BIOS file with EIST support

•

Operating system with EIST support (Windows

XP SP2/Windows

Server

2003 SP1/Linux 2.6 kernel or later versions)

Summary of Contents for RS120-E4 - 0 MB RAM















































































































































































Search results

Summary of Contents for RS120-E4 - 0 MB RAM

Reviews:

Related manuals for RS120-E4 - 0 MB RAM

Brands by name

Popular brands

Asus RS120-E4 - 0 MB RAM, User Manual

Search results

Summary of Contents for RS120-E4 - 0 MB RAM

Reviews:

Related manuals for RS120-E4 - 0 MB RAM

Brands by name

Popular brands