background image

1-5

ROG Swift PG65U Series Gaming Monitor

4.  ENTER button

•  Turns on the OSD main menu. 
•  Enacts the selected OSD menu item.

5. 

 Exit button

•  Exits the OSD menu item.
•  Toggles the Key Lock function between on and off with a long press for 5 

seconds.

6. 

 Shortcut button 1

•  Default: Brightness.

•  Turns on the OSD menu when the monitor enters standby mode.

•  To change the shortcut function, go to the System Setup > Shortcut on 

Remote menu.

7. 

  Shortcut button 2

•  Default: Brightness.
•  Turns on the OSD menu when the monitor enters standby mode.
•  To change the shortcut function, go to the System Setup > Shortcut on 

Remote menu.

8.  Volume button

•  Decreases or increases the sound level.

1.3.4 

Other Function(s)

G-SYNC Ultimate

The monitor supports HDR format. When detecting HDR content, an "HDR ON" 

message will pop up and display in the OSD menu.

• 

When displaying HDR content, the following function(s) are not available: 

GameVisual, Gamma, Dark Boost, "OFF" in the Variable Backlight, Auto 

SDR Brightness.

• 

NVIDIA Pascal GPU Graphics Card like GTX1070, GTX1080 and 

GTX1080 Ti or higher is required.

Summary of Contents for ROG SWIFT PG65U



































Reviews: