2-5
ASUS LCD Monitor PG48UQ Series
•
To use the USB 3.0 ports
: Take the supplied USB 3.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor’s
USB upstream port, and the larger end (type A) to your computer’s
USB 3.0 port. Make sure your computer is installed with the latest
Windows 10/Windows 11 operating system. That will enable the USB
ports on the monitor to work.
•
To use the 3.0 port for firmware upgrade
: Save the new firmware to
the disk drive. Then plug the disk drive to the monitor’s upstream port.
Follow the on-screen instructions to upgrade the firmware.
2.5 Turning On the Monitor
You can either press the button on the remote control or the button
on the monitor to turn on the monitor.
If the Power Indicator function is enabled and an input source is detected,
the power LED will light up red to indicate that the monitor is turned on.
The power LED will not light up in Power Saving mode.
