Asus Pundit P3-AE5 User Manual Download

Page: 42 / 92

3-2

Chapter 3: Starting up

3.1

Installing an operating system

The barebone system supports Windows

2000/XP operating systems

(OS). Always install the latest OS version and corresponding updates so

you can maximize the features of your hardware.

3.2

Powering up

Press the system power button ( ) to enter the OS.

• Motherboard settings and hardware options vary. Use the setup

procedures presented in this chapter for reference only. Refer to

your OS documentation for detailed information.

• Make sure that you install Windows

2000 Service Pack 4 or the

Windows

XP Service Pack 1 or later versions before installing the

drivers for better compatibility and system stability.

Press to turn ON the system

Summary of Contents for Pundit P3-AE5





























































































Search results

Summary of Contents for Pundit P3-AE5

Reviews:

Related manuals for Pundit P3-AE5

Brands by name

Popular brands

Asus Pundit P3-AE5, User Manual

Search results

Summary of Contents for Pundit P3-AE5

Reviews:

Related manuals for Pundit P3-AE5

Brands by name

Popular brands