Asus Pundit P3-AE5 User Manual Download

Page: 13 / 92

1-3

ASUS Pundit P3-AE5

1. 5.25-inch drive bay cover. This bay is for IDE optical drives.
2. HDD LED. This LED lights up when data is read from or written to the

hard disk drive.

3.  Power LED.
4.  Power button. Press this button to turn the system on.
5.  USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports are

available for connecting USB 2.0 devices such as a mouse, printer,

scanner, camera, PDA, and others.

6. Microphone port. This Mic (pink) port connects a microphone.
7. Headphone port. This Line In (green) port connects a headphone with

a stereo mini-plug.

8. 6-in-1 storage card reader.

Memory Stick/Pro™ card slot.

CompactFlash® card slot.

Secure Digital™/MultimediaCard slot.

SmartMedia® card slot.

Summary of Contents for Pundit P3-AE5





























































































Search results

Summary of Contents for Pundit P3-AE5

Reviews:

Related manuals for Pundit P3-AE5

Brands by name

Popular brands

Asus Pundit P3-AE5, User Manual

Search results

Summary of Contents for Pundit P3-AE5

Reviews:

Related manuals for Pundit P3-AE5

Brands by name

Popular brands