manualshive.com logo in svg

Asus PIKE 6480, User Manual, Page: 34 / 40

Share
Download
Asus PIKE 6480 User Manual Download Page 34

3-10

Chapter 3: Driver update

3.1.3 

Red Hat

®

 Enterprise Linux OS

To install the RAID card driver when installing Red Hat

®

 Enterprise OS:

1.  Boot the system from the Red Hat

®

 OS installation CD.

2.  At the 

boot:

, type 

linux dd

, then press <Enter>.

-  To install or upgrade in graphical mode, press the <ENTER> key.
-  To install or upgrade in text mode, type: linux text <ENTER>.
-  Use the function keys listed below for more information.

[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]

boot: linux dd

4.  Select 

fd0

 using the <Tab> key when asked to select the driver disk source. 

Press <Tab> to move the cursor to 

OK

, then press <Enter>.

3.  Select 

Yes

 using the <Tab> key when asked if you have the driver disk, then 

press <Enter>.

Main Menu

Do you have a driver disk?

Yes

No

Driver Disk Source

You have multiple devices which could 

serve as sources for a driver disk. 

Which would you like to use?

OK

Cancel

fd0

scd0

Summary of Contents for PIKE 6480









































Reviews:

No comments