manualshive.com logo in svg

Asus PIKE 6480, User Manual, Page: 22 / 40

Share
Download
Asus PIKE 6480 User Manual Download Page 22

2-10

Chapter 2: RAID configuration

To clean a hot spare
1.  From the utility menu bar, select 

RAID > Spare Management

, and then 

press <Enter>. The 

Spare Management

 screen appears.

Marvell BIOS Setup (c) 2008 Marvell Technology Group Ltd.

ENTER/SPACE:Select, ESC:Back/Exit

[Selection]

[Controller]

[ Devices ]

[  RAID  ]

RAID Config

Spare Management

 Port  Disk Name                          Size    Max Speed   Status

 0     SAS : ST3146855SS                  139.9GB SAS 3.0     SPARE

 NEXT

2.  Select a desired drive to clean the hot spare. Select 

NEXT, 

and then press 

<Enter>. Press <Y> after the confirmation screen appears.

Marvell BIOS Setup (c) 2008 Marvell Technology Group Ltd.

[Selection]

[Controller]

[ Devices ]

[  RAID  ]

RAID Config

Clean spare?[Y]

Spare Management

 Port  Disk Name                          Size    Max Speed   Status

*0     SAS : ST3146855SS                  139.9GB SAS 3.0     SPARE

 NEXT

3.  Press <ESC> to exit the 

Spare Management 

screen.

Summary of Contents for PIKE 6480









































Reviews:

No comments