manualshive.com logo in svg

Asus PIKE 6480, User Manual, Page: 26 / 40

Share
Download
Asus PIKE 6480 User Manual Download Page 26

3-2

Chapter 3: Driver update

3.1 

RAID driver installation

After creating the RAID sets for your server system, you are now ready to install 

an operating system to the independent hard disk drive or bootable array. This part 

provides instructions on how to install or update the RAID card drivers.

The RAID card driver might be included in the Linux OS installation CD, and 

could be loaded automatically during OS installation. However, we recommend 

using the RAID driver packaged in the RAID card support CD for better 

reliability.

3.1.1 

Creating a RAID driver disk

You may have to use another system to create the RAID driver disk from the 

support CD.

A floppy disk with the RAID driver is required when installing Windows

®

 or Linux 

operating system on a hard disk drive that is included in a RAID set. You can create 

a RAID driver disk in DOS (using the Makedisk application in the support CD).
To create a RAID driver disk in DOS environment:
1.  Place the support CD in the optical drive.
2.  Restart the computer, then enter the BIOS Setup.

3.  Select the optical drive as the first boot priority to boot from the support CD. 

Save your changes, then exit the BIOS Setup.

4.  Restart the computer.
5.  The Make Disk menu appears. Select 

PIKE 6480 SAS/SATA card Driver,

 

and press <Enter> to enter the sub-menu.

Create Driver Diskette Menu
PIKE 6480 SAS/SATA card Driver

FreeDOS command prompt

Summary of Contents for PIKE 6480









































Reviews:

No comments