Asus Pentium TX97-E User Manual Download Page 59 | Manualshive

Page: 59 / 64

background image

ASUS TX97-E User’s Manual

59

Aside from the system BIOS, the Flash memory chip on the motherboard also con-
tains the SCSI BIOS. This SCSI BIOS works in conjunction with the optional ASUS
PCI-SC200 SCSI controller card to provide a complete PCI Fast SCSI-2 interface.

All SCSI devices you install to your system require driver software to function. The
SCSI BIOS directly supports SCSI hard disks under the DOS, Windows and OS/2
environments. It also uses device drivers from the DOS floppy disk included in the
PCI-SC200 controller card package to support hard disks and other SCSI devices
working under DOS, Windows, Windows NT, Novell NetWare and OS/2. These
drivers provide higher performance than the direct BIOS support. To use these
drivers, you must install them into your system and add them to your system con-
figuration files. Driver support for SCSI devices used with SCO UNIX is also pro-
vided. These drivers are included in the second SCO UNIX floppy disk. Windows
95 support is also available using the device drivers included within the Windows
software. The ASUS PCI-SC200 is a Plug and Play adapter that is auto detected by
BIOS and current operating systems that support Plug and Play features.

For information about these drivers and their usage, see the Readme files included
in the driver packages. You can print out the contents of these files using any text
editor program.

The next few pages will instruct you on the installation of the ASUS PCI-SC200
Fast SCSI Card.

VI. ASUS PCI-SC200 SCSI Card

SCSI BIOS and Drivers

VI. ASUS

PCI-SC200

(SCSI BIOS)

«
...
57
58
59
60
61
...
»

Summary of Contents for Pentium TX97-E

































































Reviews:

No comments

Related manuals for Pentium TX97-E

Brand: Qorvo Pages: 8

Brand: IBM Pages: 40

Brand: Telit Wireless Solutions Pages: 5

Brand: Sail Pages: 18

Brand: DFI Pages: 67

Brand: NXP Semiconductors Pages: 12

B85-IE35 Series

Brand: MSI Pages: 190

Brand: Pentair Pages: 4

Brand: Intel Pages: 92

Brand: DFI Pages: 46

Brand: Texas Instruments Pages: 35

Brand: PC Partner Pages: 20

Brand: Liantec Pages: 4

B560 AORUS PRO AX

Brand: Gigabyte Pages: 52

Brand: DFI Pages: 177

Brand: Gigabyte Pages: 108

Brand: Texas Instruments Pages: 20

IN440 Micro-ATX

Brand: trimond Pages: 47

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands