Asus P9D-M Series User Manual Download Page 59

Page: 59 / 156

ASUS P9D-M Series

2-39

13. Auxiliary panel connector (20-2 pin AUX_PANEL1)

This connector is for additional front panel features such as the front panel

SMB, locator LED and switch, chassis intrusion, and LAN LEDs.

1. Front panel SMB (6-1 pin FPSMB)

These leads connect the front panel SMBus cable.

2. LAN activity LED (2-pin LAN1LINK and 2-pin LAN2LINK)

These leads are for Gigabit LAN activity LEDs on the front panel.

3. Chassis intrusion (4-1 pin AUX_CHASSIS)

These leads are for the intrusion detection feature for chassis with

intrusion sensor or microswitch. When you remove any chassis

component, the sensor triggers and sends a high-level signal to these

leads to record a chassis intrusion event. The default setting is short

CASEOPEN and GND pin by jumper cap to disable the function.

4. Locator LED (2-pin AUX_LOCLED1 and 2-pin AUX_LOCLED2)

These leads are for the Locator LED1 and LED2 on the front panel.

Connect the Locator LED cables to these 2-pin connector. The LEDs will

light up when the Locator button is pressed.

5. Locator Button/Switch (2-pin AUX_BMCLOCBNT)

These leads are for the locator button on the front panel. This button

queries the state of the system locator.

Summary of Contents for P9D-M Series





























































































































































Search results

Summary of Contents for P9D-M Series

Reviews:

Related manuals for P9D-M Series

Brands by name

Popular brands

Asus P9D-M Series, User Manual

Search results

Summary of Contents for P9D-M Series

Reviews:

Related manuals for P9D-M Series

Brands by name

Popular brands