Asus P9D-M Series User Manual Download Page 35

Page: 35 / 156

ASUS P9D-M Series

2-15

2.3.4

Installing the CPU heatsink in a rack

The Intel

1150 processor requires a specially designed heatsink to ensure

optimum thermal condition and performance.

1. Peel off the sticker on the heatsink

metal plate and affix the plate to the

back of the motherboard, matching

the standoffs to the heatsink screw

holes.

2. Use a Phillips screwdriver to tighten

the four heatsink screws using the

recommended sequence below.

•

Ensure that the heatsink is not skewed or tilted, otherwise the CPU will

overheat.

• Do not overtighten the screws. Doing so can damage the CPU.

•

Ensure that you use qualified heatsink assembly only.

•

Ensure that you have applied the thermal interface material to the top of the CPU

before installing the heatsink and fan.

Summary of Contents for P9D-M Series





























































































































































Search results

Summary of Contents for P9D-M Series

Reviews:

Related manuals for P9D-M Series

Brands by name

Popular brands

Asus P9D-M Series, User Manual

Search results

Summary of Contents for P9D-M Series

Reviews:

Related manuals for P9D-M Series

Brands by name

Popular brands