manualshive.com logo in svg

Asus P9D-E/4L, User Manual, Page: 84 / 159

Share
Download
Asus P9D-E/4L User Manual Download Page 84

ASUS P9D-E/4L

4-19

  

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

        Advanced

Change PCI Express 

Devices Settings.

  PCI Bus Driver Version 

V 2.05.02

  PCI 64bit Resources Handling

  Above 4G Decoding 

[Disabled]

  PCI Common Settings 

  Load RT32 Image  

[Enabled]

 PCI Express Settings 

 

PCIE Slot Configuration

4.4.5   PCI Subsystem Settings

Allows you to configure PCI, PCI-X, and PCI Express Settings.

Above 4G Decoding [Disabled]

This item allows you to enable or disable 64-bit capable devices to be decoded 
in above 4G Address Space if your system supports 64-bit PCI decoding. 
Configuration Options: [Disabled][Enabled]

Load RT32 Image [Enabled]

Allows you to enable or disable the RT32 Image Loading. Configuration Options: 
[Disabled][Enabled]

PCI Express Settings

Allows you to change the settings of the PCI Express Devices.

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

        Advanced

Set the ASPM Level: Force 

L0s 

- Force all links to L0s 

State 

: AUTO - BIOS auto 

configure :DISABLE - 

Disables ASM

PCI Express Device Register Setting
PCI Express Device Register Settings

ASPM Support 

     [Disabled]

WARNING: Enabling ASPM may cause some 

      PCIE devices to fail

ASPM Support [Disabled]

This item allows you to enable or disable support to Active State Power 
Management (ASPM). ASPM is a power management protocol that is used to 
extend battey life. Configuration options:
[Disabled] 

Disables ASMP

[Auto] 

BIOS auto configure

[Force L0s] 

Force all links to L0s State 

Summary of Contents for P9D-E/4L
































































































































































Reviews:

No comments