manualshive.com logo in svg

Asus P9D-E/4L, User Manual, Page: 53 / 159

Share
Download
Asus P9D-E/4L User Manual Download Page 53

ASUS P9D-E/4L

2-33

     

     

     

     

7. 

CPU, front, and rear fan connectors  

 

(4-pin CPU_FAN1, FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, REAR_FAN1)

The fan connectors support cooling fans. Connect the fan cables to the fan connectors 
on the motherboard, ensuring that the black wire of each cable matches the ground pin 
of the connector.

• 

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow 
inside the system may damage the motherboard components.

• 

These are not jumpers! DO NOT place jumper caps on the fan connectors!

• 

All connectors feature the ASUS Smart Fan technology.

6. 

Thermal sensor cable connectors (3-pin TR1)

This connector allows you to connect a Thermal sensor cable that is used for  
monitoring temperature. Connect the Thermal sensor cable to the connector and place 
its probe to the device that you want to monitor.

Summary of Contents for P9D-E/4L
































































































































































Reviews:

No comments