Asus P9D-E/4L User Manual Download Page 118

Page: 118 / 159

ASUS P9D-E/4L

5-13

5.3

Intel

Rapid Storage Technology enterprise

(Windows)

The Intel

Rapid Storage Technology enterprise allows you to create RAID 0, RAID 1, RAID 10

(RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial
ATA connectors supported by the Southbridge.

You can click

Rescan

to re-scan any attached hard disks.

Turn on the system to windows desktop.

Click the

Intel

Rapid Storage Technology enterprise

icon to display the main menu.

Your storage system is configured for data protection, increased performance and optimal data
storage capacity. You can create additional volumes to further optimize your storage system.

To enter the Intel

Rapid Storage Technology enterprise utility under Windows operating

system:

You need to manually install the Intel

Rapid Storage Technology enterprise utility on a

Windows

operating system. Please refer to the installation instructions in Chapter 6.

Summary of Contents for P9D-E/4L
































































































































































Search results

Summary of Contents for P9D-E/4L

Reviews:

Asus P9D-E/4L, User Manual, Page: 118 / 159

Search results

Summary of Contents for P9D-E/4L

Reviews: