Asus P8Z77 WS User Manual Download Page 48

Page: 48 / 176

2-26

Chapter 2: Hardware information

Chapter 2

CPU, chassis, and power fan connectors

(4-pin CPU_FAN; 4-pin CPU_OPT; 3/4 pin CHA_FAN1-4)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the

black wire of each cable matches the ground pin of the connector.

•

The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.

•

Only the CPU_FAN, CHA_FAN 1/2/3/4 connectors support the ASUS FAN Xpert 2

feature.

•

If you install two VGA cards, we recommend that you plug the rear chassis fan cable

to the motherboard connector labeled CHA_FAN1 or CHA_FAN2 for better thermal

environment.

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the

system may damage the motherboard components. These are not jumpers! Do not place

jumper caps on the fan connectors!

Summary of Contents for P8Z77 WS

















































































































































































Search results

Summary of Contents for P8Z77 WS

Reviews:

Asus P8Z77 WS, User Manual, Page: 48 / 176

Search results

Summary of Contents for P8Z77 WS

Reviews: