Asus P8Z77 WS User Manual Download Page 110

Page: 110 / 176

3-40

Chapter 3: BIOS setup

Chapter 3

3.10 Updating BIOS

The ASUS website publishes the latest BIOS versions to provide enhancements on system

stability, compatibility, or performance. However, BIOS updating is potentially risky. If there

is no problem using the current version of BIOS,

DO NOT manually update the BIOS

Inappropriate BIOS updating may result in the system’s failure to boot. Carefully follow the

instructions of this chapter to update your BIOS if necessary.

Visit the ASUS website (www.asus.com) to download the latest BIOS file for this

motherboard.

The following utilities allow you to manage and update the motherboard BIOS setup program.

ASUS Update:

Updates the BIOS in Windows

environment.

ASUS EZ Flash 2:

Updates the BIOS using a USB flash drive.

ASUS CrashFree BIOS 3:

Restores the BIOS using the motherboard support DVD or

a USB flash drive when the BIOS file fails or gets corrupted.

ASUS BIOS Updater:

Updates and backups the BIOS in DOS environment using the

motherboard support DVD and a USB flash disk drive.

Refer to the corresponding sections for details on these utilities.

Save a copy of the original motherboard BIOS file to a USB flash disk in case you need

to restore the BIOS in the future. Copy the original motherboard BIOS using the

ASUS

Update

BIOS Updater

utilities.

3.10.1

ASUS Update utility

The ASUS Update is a utility that allows you to manage, save, and update the motherboard

BIOS in Windows

environment. The ASUS Update utility allows you to:

•  Update the BIOS directly from the Internet
•  Download the latest BIOS file from the Internet
•  Update the BIOS from an updated BIOS file
•  Save the current BIOS file
•  View the BIOS version information

This utility is available in the support DVD that comes with the motherboard package.

ASUS Update requires an Internet connection either through a network or an Internet

Service Provider (ISP).

Launching ASUS Update

After installing AI Suite II from the motherboard support DVD, launch ASUS Update by

clicking

Update > ASUS Update

on the AI Suite II main menu bar.

Quit all Windows

applications before you update the BIOS using this utility.

Summary of Contents for P8Z77 WS

















































































































































































Search results

Summary of Contents for P8Z77 WS

Reviews:

Related manuals for P8Z77 WS

Brands by name

Popular brands

Asus P8Z77 WS, User Manual

Search results

Summary of Contents for P8Z77 WS

Reviews:

Related manuals for P8Z77 WS

Brands by name

Popular brands