Asus P8Q77-M2, User Manual

Page: 68 / 82

2-24 ASUS P8Q77-M2
Flow Control [None]
Flow control can prevent data loss from buffer overflow. When sending data, if the
receiving buffers are full, a ‘stop’ signal can be sent to stop the data flow. Once the
buffers are empty, a ‘start’ signal can be sent to re-start the flow. Hardware flow control
uses two wires to send stop/start signals. Configuration options: [None] [Hardware
RTS/CTS] [Software Xon/Xoff]
2.5.12 Network Stack
Network Stack [Disabled]
This item allows user to disable or enable the UEFI network stack. Configuration options:
[Disabled] [Enabled]
Ipv4 PXE Support [Enabled]
This item appears only when you set the Network Stack item to [Enabled]. When this item
is disabled, the IPV4 PXE boot option will not be created. Configuration options: [Disabled]
[Enabled]
Ipv6 PXE Support [Enabled]
This item appears only when you set the Network Stack item to [Enabled]. When this item
is disabled, the IPV6 PXE boot option will not be created. Configuration options: [Disabled]
[Enabled]