manualshive.com logo in svg

Asus P8Q67-M DO BR, User Manual, Page: 48 / 62

Share
Download
Asus P8Q67-M DO BR User Manual Download Page 48

Chapter 2: BIOS information

2-19

Serial-ATA Controller 0 [Enhanced] 

This item appears only when you set the 

SATA Mode

 item to [IDE Mode].

[Disabled] 

Disables the SATA function.

[Enhanced] 

Set to [Enhanced] to support more than four SATA devices.

[Compatible] 

Set to [Compatible] when using Windows 98/NT/2000/MS-DOS. Up to four 

SATA devices are supported under these operating systems.

Serial-ATA Controller 1 [Enhanced] 

This item appears only when you set the 

SATA Mode

 item to [IDE Mode].

[Disabled] 

Disables the SATA function.

[Enhanced] 

Set to [Enhanced] to support more than four SATA devices.

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When 

read/write of your hard disk errors occur, this feature allows the hard disk to report warning 

messages during the POST. Configuration options: [Enabled] [Disabled]

2.5.6 

Intel TXT(LT) Configuration

Secure Mode Extensions (SMX) [Enabled]

Allows you to enable or disable the Intel Secure Mode Extensions (SMX) technology. 

Configuration options: [Disabled] [Enabled]

Intel TXT(LT) Support [Disabled]

This item can be configured only when the Intel SMX, Intel Virtualization Technology (VT), 

and Intel Virtualization Technology for Directed I/O (VT-d) technologies are all enabled. 

Allows you to enable or disable the Intel Trusted Execution Technology. Configuration 

options: [Disabled] [Enabled]

Summary of Contents for P8Q67-M DO BR































































Reviews:

No comments