Asus P8Q67-M DO BR User Manual Download Page 26

Page: 26 / 62

ASUS P8Q67-M DO Series

1-16

• These connectors are set to [IDE Mode] by default. In IDE mode, you can connect Serial

ATA boot/data hard disk drives to these connectors. If you intend to create a Serial ATA

RAID set using these connectors, set the

SATA Mode

item in the BIOS to [RAID Mode].

See section

2.5.5 SATA Configuration

for details.

• Before creating a RAID set, refer to the RAID Supplementary Guide included in the

folder named Manual in the support DVD.

• You must install Windows

XP Service Pack 3 or later version before using Serial ATA

hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if

you are using Windows

XP SP3 or later version.

• When using hot-plug and NCQ, set the

SATA Mode

item in the BIOS to [AHCI Mode].

See section

2.5.5 SATA Configuration

for details.

Intel

Q67 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4 [blue])

These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via

Serial ATA 3.0 Gb/s signal cables.

If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 0+1(10)

configurations with the Intel

Matrix Storage Technology through the onboard Intel

Q67 chipset.

P8Q67-M DO/USB3/TPM

P8Q67-M DO/USB3/TPM Intel

SATA 3.0Gb/s connectors

RSATA_TXP1

RSATA_TXN1

RSATA_RXP

RSATA_RXN1

SATA3G_1

SATA3G_3

SATA3G_2

SATA3G_4

RSATA_RXN3

RSATA_RXP3

RSATA_TXN3

RSATA_TXP3

RSATA_TXP2

RSATA_TXN2

RSATA_RXP

RSATA_RXN2

RSATA_RXN4

RSATA_RXP4

RSATA_TXN4

RSATA_TXP4

Summary of Contents for P8Q67-M DO BR































































Search results

Summary of Contents for P8Q67-M DO BR

Reviews:

Asus P8Q67-M DO BR, User Manual, Page: 26 / 62

Search results

Summary of Contents for P8Q67-M DO BR

Reviews: