manualshive.com logo in svg

Asus P8Q67-M DO BR, User Manual, Page: 28 / 62

Share
Download
Asus P8Q67-M DO BR User Manual Download Page 28

ASUS P8Q67-M DO Series

1-18

12.  Speaker connector (4-pin SPEAKER)

The 4-pin connector is for the chassis-mounted system warning speaker. The speaker 

allows you to hear system beeps and warnings.

P8Q67-M DO/USB3/TPM

P8Q67-M DO/USB3/TPM 

Speaker connector

+5

V

GN

D

GN

D

Speaker Out

SPEAKER

PIN 1

11.  USB connectors (10-1 pin USB78, USB910, USB1112, USB1314)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of 

these connectors, then install the module to a slot opening at the back of the system 

chassis. These USB connectors comply with USB 2.0 specification that supports up to 

480 Mbps connection speed.

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB module cable is purchased separately.

P8Q67-M DO/USB3/TPM

P8Q67-M DO/USB3/TPM USB2.0 connectors

PIN 1

USB+5

V

USB_P10-

GND

NC

USB+5V

USB_P9

-

USB_P9

+

GND

USB910

PIN 1

USB+5

V

USB_P8

-

USB_P8

+

GND

NC

USB+5V

USB_P7

-

USB_P7

+

GND

USB78

USB1314

PIN 1

USB+5

V

USB_P12-

GND

NC

USB+5V

USB_P11-

GND

PIN 1

USB+5

V

USB_P14-

GND

NC

USB+5V

USB_P13-

GND

USB1112

Summary of Contents for P8Q67-M DO BR































































Reviews:

No comments