background image

ASUS P7P55D LE

2-17

CPU Ratio Setting [Auto]

Allows you to adjust the ratio between CPU Core Clock and BCLK Frequency. 

Use the <+> and <-> keys to adjust the value. The valid value ranges differently 

according to your CPU model.

C1E Support [Enabled]

[Enabled] 

Enables the C1E support function. This item should be enabled in order to 

enable the Enhanced Halt Sate.

[Disabled] 

Disables this function.

Hardware Prefetcher [Enabled]

[Enabled] 

Enables the Hardware Prefetcher function. This item should be enabled 

in order to enable the L2 cache (MLC) Streamer Prefetcher for tuning 

performance of the specific application.

[Disabled] 

Disables this function.

Adjacent Cache Line Prefetcher [Enabled]

[Enabled] 

Enables the Adjacent Cache Line Prefetcher function. This item should be 

enabled in order to enable the L2 cache (MLC) Spatial Prefetcher for tuning 

performance of the specific application.

[Disabled] 

Disables this function.

Max CPUID Value Limit [Disabled]

[Enabled] 

Allows legacy operating systems to boot even without support for CPUs 

with extended CPUID functions.

[Disabled] 

Disables this function.

Intel(R) Virtualization Tech [Enabled]

[Enabled] 

Allows a hardware platform to run multiple operating systems separately 

and simultaneously, enabling one system to virtually function as several 

systems.

[Disabled] 

Disables this function.

CPU TM function [Enabled]

[Enabled] 

Enables the overheated CPU to throttle its clock speed to cool down.

[Disabled] 

Disables this function.

Execute Disable Bit Capability [Enabled]

[Enabled] 

Enables the No-Execution Page Protection Technology.

[Disabled] 

Forces the XD feature flag to always return to zero (0).

Intel(R) HT Technology [Enabled]

[Enabled] 

Enables the Intel Hyper-Threading Technology.

[Disabled] 

Only one thread per activated CPU core is enabled.

Summary of Contents for P7P55D LE





































































Reviews: