manualshive.com logo in svg

Asus P5W, User Manual, Page: 185 / 210

Share
Download
Asus P5W User Manual Download Page 185

ASUS P5W

5-

5.4.5 

Cross-RAID Configuration: Creating a RAID 10 set 

 

 

with ASUS EZ-Backup and Intel ICH7R

®

A RAID 10 set requires four HDDs. The onboard RAID controller on the Intel

®

 

ICH7R Southbridge, however, controlls only three Serial ATA connectors. To build a 

RAID 10 set, you need to cross-configure Intel

®

 ICH7R with Silicon Image

®

, which 

controls the EZ_RAID connectors for the EZ-Backup feature.
Refer to the succeeding sections to build a RAID 10 set.

Hardware setup

1.  Install one Serial ATA HDD on the motherboard connector labeled EZ_RAID1.
2.  Install three Serial HDDs on the motherboard connectors labled SATA1, 

SATA3, and SATA4.

EZ Backup jumper setting and BIOS configuration

For information on EZ-Backup jumper setting and BIOS configuration, see  

section “5.4.4 Silicon Image RAID configuration.”

1.  After installing the Serial ATA hard disks, set the jumper setting to the default 

RAID 1 mode.

2.  Turn the system on, and enter the BIOS setup during POST. Go to Advanced 

menu > DH Feature page. Set the 

EZ Backup RAID Mode Change 

item to 

Enabled (if the jumper setting has been changed).

3.  Press <F10> to save and exit. The system will restart.

Summary of Contents for P5W



















































































































































































































Reviews:

No comments