Asus P5W User Manual Download Page 18

Page: 18 / 210

1-2

Chapter 1: Product introduction

1.3

Special features

1.3.1

Product highlights

Latest processor technology

This motherboard supports the latest Intel

Pentium

4 processors in the LGA775

package. With 1066/ 800 MHz FSB, Hyper-Threading Technology support, and

core-speeds of up to 3.8 GHz and beyond, Intel

’s LGA775 Pentium

4 is among

the fastest desktop processors to date. See page 2-7 for details.

Intel

Core™2 Duo/ Intel

Core™2 Extreme CPU support

This motherboard supports the latest powerful and energy efficient processors

from Intel

. Intel

Core™2 Duo and Intel

Core™2 Extreme are based on the Intel

Core™ Microarchitecture and built on the 65-nanometer (nm) process technology

with copper interconnect. Intel

Core™2 Duo and Intel

Core™2 Extreme

allow users to step up to new levels of gaming experience and multi-tasking

performance. Boosting performance is a shared and multi-core optimized L2 cache

of 2 MB or 4 MB, guaranteeing enhanced user experience in the digital home and

office. See page 2-7 for details.

Intel

65 nm Dual-Core Technology CPU support

Dual-core processors contain two physical CPU cores with dedicated L2 caches

to meet demands for more powerful processing. Intel

’s 65 nm process is the most

advanced chip manufacturing technology, delivering breakthrough performance,

enhanced media experience, and low power consumption. Intel

65nm dual-core

processors utilize the latest package technologies for a thinner, lighter design

without compromising performance. See page 2-7 for details.

Intel

975X/ICH7R chipset

The Intel

975X Memory Controller Hub (MCH) and the ICH7R I/O controller hub

provide the vital interfaces for the motherboard. The Intel

975X supports up to 8

GB dual-channel DDR2-667/533 MHz, 1066/800 FSB, PCI Express x16 graphics,

and dual-core CPU. The MCH supports the Intel

Memory Pipeline Technology

(MPT) that boosts system performance.
The Intel

ICH7R Southbridge integrates four Serial ATA ports enabled through

the Serial ATA 3 Gb/s RAID controller to ensure data security and enable powerful

multi-task processing.

Summary of Contents for P5W



















































































































































































































Search results

Summary of Contents for P5W

Reviews:

Asus P5W, User Manual, Page: 18 / 210

Search results

Summary of Contents for P5W

Reviews: