manualshive.com logo in svg

Asus P5W, User Manual, Page: 168 / 210

Share
Download
Asus P5W User Manual Download Page 168

5-

Chapter 5: Software support

Deleting a RAID set

1.   In the main JMB363 RAID BIOS menu, highlight Delete RAID Disk Drive 

using the up/down arrow key then press <Enter>.

2.   Use the space bar to select the RAID set you want to delete.
 

A selected set shows a   sign before it. Press the <Del> key to delete the 

set.

3.  A dialogue box appears to confirm the action. Press <Y> to confirm; 

otherwise, press <N>.

Pressing <Y> deletes all the data in the HDDs.

[Main Menu]
Create RAID Disk Drive 

Delete RAID Disk Drive

 

Revert HDD to Non-RAID 

Repair Mirror Conflict 

Save and Exit Setup 

Exit Without Saving

JMicron  Technology  Corp.  PCI-to-SATA  II/IDE  RAID  Controller  BIOS  v0.97

[Hard Disk Drive List]

 

Model Name 

Capacity 

Type/Status 

 HDD0:  HDS722516VLSA80   164 GB 

RAID Inside 

 HDD1:  HDS722516DLA380  164 GB  

RAID Inside

[RAID Disk Drive List]

 

Model Name 

RAID Level  

Capacity 

Status 

Members(HDDx)

 RDD0:  JRAID 

0-Stripe 

XXX GB 

Normal 

01

[Main Menu]
Create RAID Disk Drive 

Delete RAID Disk Drive 

Revert HDD to Non-RAID 

Repair Mirror Conflict
Save and Exit Setup 

Exit Without Saving

ALL DATA ON THE RAID WILL BE LOST!!

ARE YOU SURE TO DELETE (Y/N)? Y

[    TAB]-Switch Window  [

↑↓

]-Select Item 

[ENTER]-Action   [ESC]-Exit 

Summary of Contents for P5W



















































































































































































































Reviews:

No comments