Asus P5SD2-X SE Installation Manual Download Page 42

Page: 42 / 108

1-30

Chapter 1: Product introduction

3. Serial ATA connectors (7-pin SATA1, SATA2)

These connectors are for the Serial ATA signal cables for Serial ATA 1.5 Gb/s

hard disk drives.

If you installed Serial ATA hard disk drives, you can can create a RAID 0,

RAID 1, and JBOD configuration through the onboard VIA VT8237A RAID

controller.

Important notes on Serial ATA
•

The Serial ATA RAID feature (RAID 0, RAID 1, and JBOD) is available only

if you are using Windows

2000/2003 Server/XP operation system.

• Install the Windows

2000 Service Pack 4, the Windows

XP Service

Pack1 or later version before using Serial ATA.

• Please refer to section “Onboard Devices Configuration” in the BIOS for

details on SATA RAID configuration.

4. Jmicron Serial ATA RAID connector (7-pin SATA_RAID1)

This connector is for a Serial ATA signal cable. This connector supports a

Serial ATA hard disk drive, which you can combine with an external Serial

ATA hard disk drive, to configure for RAID via the onboard Serial ATA RAID

controller.

Do not remove/unplug external SATA devices when running under RAID mode.

P5VD2-X

P5VD2-X SATA connectors

SATA

SATA1

P5VD2-X

P5VD2-X SATA RAID connector

SATA_RAID1

GND

RSATA_

TXP2

RSATA_

TXN2

GND

RSATA_

RXP2

RSATA_

RXN2

GND

Summary of Contents for P5SD2-X SE













































































































Search results

Summary of Contents for P5SD2-X SE

Reviews:

Asus P5SD2-X SE, Installation Manual, Page: 42 / 108

Search results

Summary of Contents for P5SD2-X SE

Reviews: