manualshive.com logo in svg

Asus P5SD2-X SE, Installation Manual, Page: 39 / 108

Share
Download
Asus P5SD2-X SE Installation Manual Download Page 39

ASUS P5VD2-X

1-27

7.  Coaxial S/PDIF Out port. This port connects an external audio output device 

via a coaxial S/PIDF cable.

8.  USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are 

available for connecting USB 2.0 devices.

9.  USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are 

available for connecting USB 2.0 devices.

10.  External SATA port. This port connects to an external Serial ATA hard disk 

drive. To configure a RAID 0, a RAID 1, or a JBOD set, install an external 

Serial ATA hard disk drive and an internal Serial ATA hard disk drive to the 

SATA connector labeled SATA_RAID1.

12.  PS/2 keyboard port (purple). This port is for a PS/2 keyboard.

The external SATA port supports 

external Serial ATA 1.5 and 3 Gb/s 

devices. Longer cables support 

higher power requirements to 

deliver signal up to two meters 

away,  and enables improved hot-

swap function.

Do not insert a different connector 

to this port. 

11.  Serial port. This port connects a mouse, modem, or other devices that 

conform with serial specification.

Audio 2, 4, or 6-channel configuration

Port

Headset 

2-channel

4-channel

6-channel

Light Blue

Line In

Surround

Surround

Lime

Headphone/Front

Front Speaker Out

Front Speaker Out

Pink

Mic In

Mic In

Center/Subwoofer

Summary of Contents for P5SD2-X SE













































































































Reviews:

No comments