Asus P5SD2-X SE Installation Manual Download Page 34

Page: 34 / 108

1-22

Chapter 1: Product introduction

1.8.4

PCI slots

The PCI slots support cards such as

a LAN card, SCSI card, USB card,

and other cards that comply with PCI

specifications. The figure shows a LAN

card installed on a PCI slot.

1.8.5

PCI Express x1 slot

This motherboard supports PCI Express

x1 network cards, SCSI cards and other

cards that comply with the PCI Express

specifications. The figure shows a

network card installed on the PCI Express

x1 slot.

1.8.6

PCI Express x16 slot

This motherboard supports PCI Express

x16 graphic cards that comply with PCI

Express specifications. The figure shows

a graphics card installed on the PCI

Express x16 slot.

• PCI-E x1 and eSATA cannot be used simultaneously.

• The default setting of this configuration is eSATA function. If you

want to use the PCI-Express x1 function, set Ex-SATA/PCI-E*1

Option item in the BIOS to [PCI-E*1]. Refer to page 2-25 for

details.

Summary of Contents for P5SD2-X SE













































































































Search results

Summary of Contents for P5SD2-X SE

Reviews:

Asus P5SD2-X SE, Installation Manual, Page: 34 / 108

Search results

Summary of Contents for P5SD2-X SE

Reviews: