ASUS P5QPL-VM EPU
2-11
Overclock Options [Overclock 5%]
Allows you to select the overclock options. Configuration options: [Overclock 5%]
[Overclock 10%] [Overclock 15%] [Overclock 20%] [Overclock 30%] [Test Mode]
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
The following item appears only when you set the
AI Overclocking
item to
[Overclock Profile]
.
FSB
DRAM Frequency
Auto
667MHz
800MHz
960MHz
1000MHz
1067MHz
1100MHz
1200MHz
1333
•
•
•
•
•
1066
•
•
•
•
800
•
•
•
The DRAM Frequency options vary with different FSB values. Refer to the following table
for the DRAM Frequency options when the FSB value is 1333, 1066, and 800.
PCI Express Frequency [Auto]
Allows you to set the PCI Express frequency. Configuration options: [Auto] [90] ~ [150]
Memory Voltage [Auto]
Allows you to set the memory voltage. The values range from 1.50000V to 2.44500V with a
0.01500V increment. Use the
<+> / <->
keys to adjust the value. Configuration options: [Auto]
[Max. = 2.44500V] [Min. = 1.50000V]
NB Voltage [Auto]
Allows you to select the North Bridge voltage. Configuration options: [Auto] [1.125V] [1.175V]
[1.225V] [1.275V]
SB 1.5V Voltage [1.5V]
Allows you to select the South Bridge voltage. Configuration options: [1.5V] [1.6V]
CPU VTT [1.2V]
Allows you to select FSB termination voltage. Configuration options: [1.2V] [1.3V]
CPU Over Voltage [Auto]
Allows you to select the CPU Over Voltage. Configuration options: [Auto] [+50mv] [+100mv]
[+150mv]
Auto PSI [Enabled]
Enables or disables auto PSI. When you set this item to
[Disabled]
, power runs in the
fixed 4 phase mode. When you set this item to
[Enabled]
, power runs in the auto mode.
Configuration options: [Enabled] [Disabled]
DRAM Frequency [Auto]
Allows you to set the DDR2 operating frequency. Configuration options: [Auto] [667MHz]
[800MHz] [1067MHz]
