Asus P5N-T Deluxe Owner'S Manual Download Page 61

Page: 61 / 174

ASUS P5N-T Deluxe

2-35

13. ASUS Q-Connector (system panel)

You can use the ASUS Q-Connector to connect/disconnect chassis front panel

cables in a few steps. Refer to the instructions below to install the ASUS Q-

Connector.

1. Connect the front panel cables to the

ASUS Q-Connector.

Refer to the labels on the Q-Connector

to know the detailed pin definitions, then

match them to the respective front panel

cable labels.

2. Install the ASUS Q-Connector to the

system panel connector, making sure

the orientation matches the labels on the

motherboard.

3. The front panel functions are now enabled.

The figure shows the Q-Connector properly

installed on the motherboard.

Due to space limitation, when using the PCIEX16_3 slot for a graphics card with

a bulky case, do not install the Q-Connector.

Summary of Contents for P5N-T Deluxe















































































































































































Search results

Summary of Contents for P5N-T Deluxe

Reviews:

Related manuals for P5N-T Deluxe

Brands by name

Popular brands

Asus P5N-T Deluxe, Owner'S Manual

Search results

Summary of Contents for P5N-T Deluxe

Reviews:

Related manuals for P5N-T Deluxe

Brands by name

Popular brands