manualshive.com logo in svg

Asus P5N-D - Motherboard - ATX, User Manual, Page: 53 / 164

Share
Download
Asus P5N-D - Motherboard - ATX User Manual Download Page 53

ASUS P5N-D

2-29

Connect the right-angle side of SATA 

signal cable to the SATA device, or 

connect the right-angle side of the 

SATA cable to the onboard SATA port 

to avoid mechanical conflict with huge 

graphics cards.

Right-angle side

4.  USB connectors  (10-1 pin USB56, USB78)

These connectors are for USB 2.0 ports. Connect the USB module cable 

to any of these connectors, then install the module to a slot opening at the 

back of the system chassis. These USB connectors comply with USB 2.0 

specification that supports up to 480 Mbps connection speed.

Never connect a 1394 cable to the USB connectors. Doing so will damage the 

motherboard!

You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and 

then install the Q-Connector (USB) to the USB connector onboard.

P

5

N

-D

®

P5N-D USB 2.0 connectors

USB+5V USB_P6-  GN

D

NC

USB+5

V

USB_P5- 

GN

D

PIN1

USB56

USB+5V USB_P8-  GN

D

NC

USB+5

V

USB_P7- 

GN

D

PIN1

USB78

Summary of Contents for P5N-D - Motherboard - ATX





































































































































































Reviews:

No comments