Asus P5KPL-VM - Motherboard - Micro ATX, User Manual

Page: 67 / 94

ASUS P5KPL-VM 2-19
FSB / CPU External Frequency Synchronization
Front Side Bus CPU External Frequency
FSB 1333 333 MHz
FSB 1066 266 MHz
FSB 800 200 MHz
DRAM Frequency [Auto]
Allows you to set the DDR2 operating frequency.
Configuration options (for 1333MHz FSB CPU): [Auto] [667MHz] [800 MHz] [1000
MHz] [1110MHz]
Configuration options (for 1066MHz FSB CPU): [Auto] [667MHz] [800 MHz] [1066
MHz]
Configuration options (for 800MHz FSB CPU): [Auto] [667MHz] [800 MHz]
CPU Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and PCI bus.
The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to
adjust the CPU frequency. You can also type the desired CPU frequency using the
numeric keypad. The values range from 133 to 500. Refer to the table below for
the correct Front Side Bus and CPU External Frequency settings.
2.4.2 USB Configuration
The items in this menu allows you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
USB Configuration
Module Version - 2.24.0-13.4
USB Devices Enabled:
None
USB Functions [8 USB Ports]
USB 2.0 Controller [Enabled]
Legacy USB Support [Auto]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
USB Mass Storage Device Configuration
Options
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
Options
PCI Express Frequency [Auto]
Allows you to select PCI express frequency. Configuration options: [Auto] [90] [91]
[92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104]
Selecting a very high DRAM frequency may cause the system to become
unstable! If this happens, revert to the default setting.
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows None.