Asus P5KPL IPC/SI User Manual Download Page 55

Page: 55 / 94

ASUS P5KPL

2-7

2.1.4

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore

the BIOS file when it fails or gets corrupted during the updating process. You can

update a corrupted BIOS file using the motherboard support CD , the floppy disk or

the USB flash disk that contains the updated BIOS file.

• Prepare the motherboard support CD,

the floppy disk or the USB flash disk

containing the updated motherboard BIOS before using this utility.

• Make sure that you rename the original or updated BIOS file in the floppy

disk or the USB flash disk to

P5KPL.ROM

Recovering the BIOS from a floppy disk

To recover the BIOS from a floppy disk:

1. Turn on the system.

2. Insert the floppy disk with the original or updated BIOS file to the floppy disk

drive.

3. The utility displays the following message and automatically checks the

floppy disk for the original or updated BIOS file.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...

When found, the utility reads the BIOS file and starts flashing the corrupted

BIOS file.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file “

P5KPL

.ROM”. Completed.

Start flashing...

DO NOT shut down or reset the system while updating the BIOS! Doing so can

cause system boot failure!

4. Restart the system after the utility completes the updating process.

Install memory module in DIMM_A1 or DIMM_B1 slots.

Summary of Contents for P5KPL IPC/SI































































































Search results

Summary of Contents for P5KPL IPC/SI

Reviews:

Related manuals for P5KPL IPC/SI

Brands by name

Popular brands

Asus P5KPL IPC/SI, User Manual

Search results

Summary of Contents for P5KPL IPC/SI

Reviews:

Related manuals for P5KPL IPC/SI

Brands by name

Popular brands