Asus P5KPL IPC/SI User Manual Download Page 52

Page: 52 / 94

2-4

Chapter 2: BIOS setup

• This function can support devices such as USB flash disk, or floppy disk

with

FAT 32/16

format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent

system boot failure!

4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update

process and automatically reboots the system when done.

To update the BIOS using EZ Flash 2:

1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for

the motherboard.

2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the

system.

2.1.2

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go

through the long process of booting from a floppy disk and using a DOS-based

utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing

<Alt> + <F2> during the Power-On Self Tests (POST).

3. You can launch the EZ Flash 2 in two ways.

(1)

Insert the floppy disk / USB flash disk that contains the BIOS file to the

floppy disk drive or the USB port.

Press <Alt> + <F2> during POST to display the following.

Note

ASUSTek EZ Flash 2 BIOS ROM Utility V3.06

Current ROM

FLASH TYPE:

WOINBOND W25X80

PATH:

A:\

BOARD:

P5KPL

VER:

0123

DATE:

07/17/07

(2) Enter BIOS setup program. Go to the

Tools

menu then select

EZ Flash2

and press <Enter>.

You can switch between drives by pressing <Tab> before the correct file

is found. Then press <Enter>.

[Enter] Select or Load [B] Backup [ESC] Exit

[Tab] Switch [Up/Down/Home/End] Move

Note

Update ROM

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

Summary of Contents for P5KPL IPC/SI































































































Search results

Summary of Contents for P5KPL IPC/SI

Reviews:

Related manuals for P5KPL IPC/SI

Brands by name

Popular brands

Asus P5KPL IPC/SI, User Manual

Search results

Summary of Contents for P5KPL IPC/SI

Reviews:

Related manuals for P5KPL IPC/SI

Brands by name

Popular brands