manualshive.com logo in svg

Asus P4P800-F, User Manual, Page: 53 / 65

Share
Download
Asus P4P800-F User Manual Download Page 53

2-14

Chapter 2: BIOS information

2.4.5 USB Configuration

USB Function [8 USB Ports]

This field disables all USB ports or sets the number number of USB ports to
enable. Configuration options: [Disabled] [2 USB Ports] [4 USB Ports] [6 USB
Ports] [8 USB Ports]

Legacy USB Support [Enabled]

This field enables or disables the support for legacy USB. The [Auto] option
disables the USB legacy support if no USB devices are connected. Configuration
options: [Disabled] [Enabled] [Auto]

IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, IRQ14, IRQ15
[Available]

This field specifies if the IRQ is reserved or available for use by Legacy ISA
devices. Configuration options: [Available] [Reserved]

DMA Channel 0, 1, 3, 5, 6, 7 [Available]

This field specifies if the DMA Channel is reserved or available for use by Legacy
ISA devices. Configuration options: [Available] [Reserved]

Reserved Memory Size [Disabled]

This field specifies the reserved memory block for use of legacy ISA devices.
Configuration options: [Disabled] [16k] [32k] [64k]

Summary of Contents for P4P800-F


































































Reviews:

No comments