manualshive.com logo in svg

Asus P4P800-F, User Manual, Page: 37 / 65

Share
Download
Asus P4P800-F User Manual Download Page 37

1-26

Chapter 1: Product introduction

13. Optional serial port connector (10-1 pin COM2)

This connector accommodates a second serial port using an optional serial
port bracket. Connect the bracket cable to this connector then install the
bracket into a slot opening at the back of the system chassis.

12.  Infrared Module connector (10-1 pin IR_CON1)

These connectors support an optional wireless transmitting and receiving
infrared module. The module mounts to a small opening on the system chassis
that support this feature.

Use the ten pins as shown in Back View and connect a ribbon cable from the
module to the motherboard SIR connector according to the pin definitions.

The COM2 module is not included in this motherboard package.

The IR module is not included in this motherboard package.

P4P800-F

®

P4P800-F Infrared Module Connector

Standard Infrared (SIR)

Front View

Back View

+5V

IRTX

IRRX

(NC)

GND

SIR

+5V

IRRX

IR

TX

GND

IRAX

GND

CIRRX

CIR+5V

CIR

GND

P4P800-F

®

P4P800-F Serial COM2 Bracket

PIN 1

COM2

Summary of Contents for P4P800-F


































































Reviews:

No comments