ASUS P4P800-F motherboard user manual
1-13
1.9
System memory
The motherboard comes with four Double Data Rate (DDR) Dual Inline Memory
Module (DIMM) sockets. These sockets support up to 4GB system memory using
184-pin unbuffered non-ECC PC3200/PC2700/PC2100 DDR DIMMs. The
following figure shows the location of the DDR DIMM sockets.
This motherboard supports different memory frequencies depending on the CPU
FSB (Front Side Bus) and the type of DDR DIMM.
Make sure to unplug the power supply before adding or removing DIMMs or
other system components. Failure to do so may cause severe damage to both
the motherboard and the components.
Follow these steps to install a DIMM.
1. Unlock a DIMM socket by pressing
the retaining clips outward.
2. Align a DIMM on the socket such that
the notch on the DIMM matches the
break on the socket.
3. Firmly insert the DIMM into the socket
until the retaining clips snap back in
place and the DIMM is properly
seated.
CPU FSB
DDR DIMM Type
Memory Frequency
800 MHz
PC3200/PC2700/PC2100
400/333/266 MHz
533 MHz
PC2700/PC2100
333/266 MHz
400 MHz
PC2100
266 MHz
1.9.1 Installing a DIMM
P4P800-F
®
P4P800-F 184-Pin DDR DIMM Sockets
80 Pins
104 Pins
DIMM_A1
DIMM_A2
DIMM_B1
DIMM_B2
Unlocked Retaining Clip
DDR DIMM notch