manualshive.com logo in svg

Asus P4B-LX, User Manual

Share
Download
Asus P4B-LX User Manual Download Page 42

2-22

Chapter 2: Hardware information

8. System panel connectors (20-pin PANEL)

This connector accommodates several system front panel functions.

Figure 2-28

System Panel Connectors

•

System Power LED Lead (3-1 pin PWRLED)

This 3-1 pin connector connects to the system power LED.  The LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.

•

Keyboard Lock Lead (2-pin KEYLOCK)

This lead connects to a chassis-mounted switch to allow the use of the
keyboard lock feature.

•

System Warning Speaker Lead (2-pin SPKR)

This 4-pin connector connects to the case-mounted speaker and
allows you to hear system beeps and warnings.

•

System Message LED Lead (2-pin SUSLED)

This 2-pin connector is for the system message LED that indicates
receipt of messages from a fax/modem. The normal status for this LED
is ON, when there is no incoming data signal. The LED blinks when
data is received.  The system message LED feature requires an ACPI
OS and driver support.

P4B-LX

P4B-LX System Panel Connectors

* 

Requires an ATX power supply.

KEY_LOCK

IDELED-

KEY_LOCK_G

+5V

SPKR

SUSLED

RESET

PWR_BTN

PWRBTN

PWR_LED-

PWR_LED2

-

NC

GND

SMI

PWR_BTN_G

RESET_G

MSG_LED-

SMI_G

IDELED

PWRLED

RESETCON

IDELED2

EXTSMI

Speaker

Connector

KEYLOCK

Summary of Contents for P4B-LX













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands