manualshive.com logo in svg

Asus P4B-LX, User Manual

Share
Download
Asus P4B-LX User Manual Download Page 35

ASUS P4B-LX motherboard user guide

2-15

2.6.3 PCI slots

This motherboard has three 32-bit PCI slots. The slots support PCI cards
such as a LAN card, SCSI card, USB card, and other cards that comply
with PCI specifications.

The following figure shows a LAN card installed on a PCI slot.

Figure 2-19

Accelerated Graphics Port (AGP) Slot Location

Figure 2-18

Installed PCI Card

2.6.4 AGP slot

This motherboard has an Accelerated Graphics Port (AGP) slot that
su1.5V AGP cards. When you buy an AGP card, make sure that
you ask for one with +1.5V specification.

Take note of the notches on the card golden fingers to ensure that they fit
the AGP slot on your motherboard. Below is an example of a +1.5V AGP
card.

The AGP slot supports only 1.5V AGP cards. NEVER  install a 3.3V
AGP card into the slot. Doing so will severely damage the
motherboard!

P4B-LX

P4B-LX Accelerated Graphics Port (AGP)

Keyed for 1.5v

Summary of Contents for P4B-LX













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands