8
Installation manual
English
. Connect the SATA signal plug
(A) and power plug (B) to the
connectors at the back of the hard
disk drive.
3. Place the HDD into the bay. Make
sure the HDD screws align with the
screw tracks.
4. Push the drive to the direction
of the arrows until the drive lock
clicks.
A
B
3
HDD drive lock
Reinstalling the front panel cover
1. Insert the front panel cover tabs to the holes on the
right side of the chassis.
. Insert the front panel cover hooks to the chassis
until the cover fits in place.
1
Reinstalling the cover
1. Reinstall the chassis support bracket and the expansion card lock.
. Insert the cover tabs to the holes on both sides of the chassis.
3. Push the cover toward the front panel until it fits in place.
4. Secure the cover with two screws you removed earlier.
3
4
4
