Asus P3-P5G33 - P Series - 0 MB RAM User Manual Download Page 35

Page: 35 / 98

2-19

ASUS P3-P5G33

2.8

Removing the card reader

In the future, you may have to remove or replace the 6-in-1 card reader.
To uninstall the card reader:
1. Remove the front panel assembly following the instructions in “2.3.2

Removing the front panel assembly”.

2. Locate the lock on both sides of the

card reader assembly.

3. Press the card reader lock

inwards(A), then slightly pull the

card reader assembly outward (B)

until the USB cable and plug is

exposed.

4. Disconnect the USB cable and plug

from the card reader assembly,

then set the card reader assembly

aside.

Summary of Contents for P3-P5G33 - P Series - 0 MB RAM



































































































Search results

Summary of Contents for P3-P5G33 - P Series - 0 MB RAM

Reviews:

Related manuals for P3-P5G33 - P Series - 0 MB RAM

Brands by name

Popular brands

Asus P3-P5G33 - P Series - 0 MB RAM, User Manual

Search results

Summary of Contents for P3-P5G33 - P Series - 0 MB RAM

Reviews:

Related manuals for P3-P5G33 - P Series - 0 MB RAM

Brands by name

Popular brands