20
ASUS P2Z-VM User’s Manual
System Memory
III. H/W SETUP
III. HARDWARE SETUP
DIMM Memory Installation Procedures:
Insert the module(s) as shown. Because the number of pins are different on either
side of the breaks, the module will only fit in the orientation as shown. DRAM
SIMM modules have the same pin contacts on both sides. SDRAM DIMMs have
different pin contacts on each side and therefore have a higher pin density.
P2Z-VM 168-Pin DIMM Sockets
20 Pins
60 Pins
88 Pins
Lock
R
P2Z-VM
The DIMMs must be 3.3Volt unbuffered SDRAMs. To determine the DIMM type,
check the notches on the DIMMs (see figure below).
168-Pin DIMM Notch Key Definitions (3.3V)
DRAM Key Position
Voltage Key Position
Unbuffered
RFU
Buffered
Reserved
3.3V
5.0V
The notches on the DIMM will shift between left, center, or right to identify the type
and also to prevent the wrong type from being inserted into the DIMM slot on the
motherboard. You must tell your retailer the correct DIMM type before purchasing.
This motherboard supports four clock signals per DIMM.
Summary of Contents for P2Z-VM
Page 1: ...R P2Z VM Pentium III II CeleronTM Motherboard USER S MANUAL ...
Page 61: ...ASUS P2Z VM User s Manual 61 R SUPPORT CD ...
Page 95: ...ASUS P2Z VM User s Manual 95 This page was intentionally left blank ...
Page 96: ...ASUS P2Z VM User s Manual 96 This page was intentionally left blank ...