Asus P2E-N User Manual Download Page 103

Page: 103 / 120

103

ASUS P2L-N/P2E-N User’s Manual

First Time Installation

When starting Windows 95 (OSR2.0) or Windows NT 4.0, the operating system will
detect that you have a new PCI Multimedia Device, then an Update Device Driver
Wizard will appear.

Click Next.

Click Browse to locate the “\DRIVERS
\M2REV1.00\WIN95” (or NT40) direc-
tory on the ASUS Support CD.

Click Ok and “ESS Device Manager” will
be shown. Click the Finish button.

Click Browse and locate the “\DRIVERS
\M2REV1.00\WIN95” (or NT40) directory on
the ASUS Support CD again.

You will be prompted to locate the drivers
again. Click Ok.

Follow the self-explanatory instructions to
finish your driver installation.

Click Other Locations to direct the wiz-
ard to the audio driver files.

D. Audio Driver

D. Audio

Driver

First Installation

Summary of Contents for P2E-N

























































































































Search results

Summary of Contents for P2E-N

Reviews:

Related manuals for P2E-N

Brands by name

Popular brands

Asus P2E-N, User Manual

Search results

Summary of Contents for P2E-N

Reviews:

Related manuals for P2E-N

Brands by name

Popular brands