manualshive.com logo in svg

Asus P2B98-XV, User Manual, Page: 69 / 88

Share
Download
Asus P2B98-XV User Manual Download Page 69

ASUS P2B98-XV User’s Manual

69

B. Other Video Drivers

Video Driver Installation for IBM OS/2

The ATI OS/2 video driver is to be used for the English version of OS/2 only.

Installing ATI video drivers in English OS/2 or OS/2 Warp:
1. Start OS/2
2. Check that OS/2 is using standard VGA driver and other applications are closed.
3. Double-click the OS/2 System folder.
4. Double-click the Command Prompts folder.
5. Double-click the OS/2 Full Screen object.
6. Insert the installation CD (assuming your CD-ROM drive is letter D)
7. Run OS2INST from \DRIVERS\ATI435\OS2 <Enter>

8. Select IBM OS/2 - Install OS/2 Driver appears.
9. Select your version of OS/2.
10. Type C: (the drive letter of your OS/2 system) <Enter> - copying files appears.
11. Exit the installation program
12. Type C: <Enter>,  CD\MACH_OS2 <Enter>, DSPINSTL
13. Display Driver Install panel appears - select Primary Display.
14. Click OK - Driver selection list appears.
15. Select the latest ATI mach64 enhanced driver version from the list - click OK.
16. In the Monitor Configuration Selection Utility, select Install Using Defaults

for Monitor Type, then click OK.

17. When the source directory panel appears, choose Change and enter path or use

the default location of C:\MACH_OS2 - Click SET

18. Click INSTALL.
19. Type EXIT to close the OS/2 full screen command prompt.
20. Shut down OS/2
21. Restart OS/2.  It will default to 640x480 in 256 colors.  To change screen reso-

lution and/or color depth, see your OS/2 User’s Guide.

B. Other V

ideo Drivers

IBM OS/2

Summary of Contents for P2B98-XV

























































































Reviews:

No comments